| Quantity: | |
|---|---|
The 18mm Color PVC Co-Extruded Board for Wall transforms interior and exterior wall design with its vibrant aesthetics, durability, and easy installation—replacing traditional materials like ceramic tile, wood paneling, and painted drywall that suffer from cracking, fading, or moisture damage. This wall-specific material features a co-extruded construction combining a 0.8mm thick colored surface layer (with UV-stable pigments) and a reinforced foam core (density 0.75–0.85g/cm³) engineered for structural performance on vertical surfaces. Available in 32 standard colors and 12 woodgrain patterns, it achieves color consistency within ΔE <0.7 across production runs, ensuring uniform appearance in large installations. Certified to ISO 1169 and EN 13501-1 (Class B-s1,d0) for fire safety, it emits <0.001mg/m³ VOCs, meeting strict indoor air quality standards. Its 18mm thickness provides sufficient rigidity for wall mounting without additional backing, while the tongue-and-groove edge system enables seamless panel joining for large wall surfaces.
Wall-Specific Structural Design
Engineered with vertical load optimization, the board resists sagging when mounted on walls with deflection <1mm/m over 2.4m height. The core contains 3% glass fiber reinforcement that enhances impact resistance (Izod strength 14kJ/m²), withstanding accidental bumps from furniture or equipment without denting—outperforming drywall (easily damaged) and wood paneling (prone to dents).
All-Environment Durability
For exterior walls, it withstands temperature extremes from -30°C to 70°C and wind speeds up to 80km/h (ASTM E1886 testing) with minimal dimensional change (<0.1%). The UV-stable surface retains 97% color intensity after 3,000 hours of outdoor exposure, while the closed-cell structure prevents water absorption (<0.15% ASTM D570), resisting rot and mold in rainy climates. For interior walls, it resists humidity in bathrooms (95% RH) and grease in kitchens without surface degradation.
Installation Efficiency
The tongue-and-groove system allows panel alignment in minutes, reducing installation time by 50% compared to tile or wood paneling. It mounts to studs or drywall using 35mm panel screws (countersunk and covered with color-matched caps) or construction adhesive for seamless applications. Pre-routed channels along the back facilitate wire management for wall-mounted TVs or lighting, eliminating the need for separate raceways.
Commercial Interior Walls
Ideal for retail stores, restaurants, and offices where durable, decorative walls withstand heavy foot traffic. The color stability ensures brand consistency across locations, while the easy cleaning surface handles frequent sanitization in food service areas.
Exterior Facades
Enhances building exteriors with vibrant colors or woodgrain finishes that resist weathering. Suitable for low-rise commercial buildings, house exteriors, and outdoor kiosks, providing a maintenance-free alternative to painted wood or stucco.
Wet Area Walls
Perfect for bathroom shower walls, laundry rooms, and pool houses where moisture resistance is critical. The non-porous surface prevents mold growth, while the color-through construction means scratches from cleaning don’t reveal underlayers.
Q: What is the maximum wall height for a single panel run?
A: Panels can be installed vertically up to 3.6m height with proper stud spacing (40cm on center). For taller walls, horizontal installation with a mid-wall support rail is recommended to prevent deflection.
Q: How to clean exterior panels?
A: For exterior use, rinse with a garden hose (low pressure) quarterly to remove dust. For stubborn dirt, use a soft brush with mild detergent solution—avoid pressure washers (>1,500 PSI) which may damage the surface.
Q: Can it be painted over if color changes are needed?
A: Yes, lightly sand with 220-grit sandpaper to create a micro-rough surface, then apply acrylic latex paint. The non-porous surface requires a primer formulated for plastics to ensure adhesion, with touch-up paint lasting 3–5 years before recoating is needed.
Q: What is the fire performance rating for interior use?
A: It achieves EN 13501-1 Class B-s1,d0, meaning it has low flame spread, produces little smoke, and no burning droplets—suitable for use in corridors, lobbies, and multi-occupancy buildings where fire safety is critical.
The 18mm Color PVC Co-Extruded Board for Wall transforms interior and exterior wall design with its vibrant aesthetics, durability, and easy installation—replacing traditional materials like ceramic tile, wood paneling, and painted drywall that suffer from cracking, fading, or moisture damage. This wall-specific material features a co-extruded construction combining a 0.8mm thick colored surface layer (with UV-stable pigments) and a reinforced foam core (density 0.75–0.85g/cm³) engineered for structural performance on vertical surfaces. Available in 32 standard colors and 12 woodgrain patterns, it achieves color consistency within ΔE <0.7 across production runs, ensuring uniform appearance in large installations. Certified to ISO 1169 and EN 13501-1 (Class B-s1,d0) for fire safety, it emits <0.001mg/m³ VOCs, meeting strict indoor air quality standards. Its 18mm thickness provides sufficient rigidity for wall mounting without additional backing, while the tongue-and-groove edge system enables seamless panel joining for large wall surfaces.
Wall-Specific Structural Design
Engineered with vertical load optimization, the board resists sagging when mounted on walls with deflection <1mm/m over 2.4m height. The core contains 3% glass fiber reinforcement that enhances impact resistance (Izod strength 14kJ/m²), withstanding accidental bumps from furniture or equipment without denting—outperforming drywall (easily damaged) and wood paneling (prone to dents).
All-Environment Durability
For exterior walls, it withstands temperature extremes from -30°C to 70°C and wind speeds up to 80km/h (ASTM E1886 testing) with minimal dimensional change (<0.1%). The UV-stable surface retains 97% color intensity after 3,000 hours of outdoor exposure, while the closed-cell structure prevents water absorption (<0.15% ASTM D570), resisting rot and mold in rainy climates. For interior walls, it resists humidity in bathrooms (95% RH) and grease in kitchens without surface degradation.
Installation Efficiency
The tongue-and-groove system allows panel alignment in minutes, reducing installation time by 50% compared to tile or wood paneling. It mounts to studs or drywall using 35mm panel screws (countersunk and covered with color-matched caps) or construction adhesive for seamless applications. Pre-routed channels along the back facilitate wire management for wall-mounted TVs or lighting, eliminating the need for separate raceways.
Commercial Interior Walls
Ideal for retail stores, restaurants, and offices where durable, decorative walls withstand heavy foot traffic. The color stability ensures brand consistency across locations, while the easy cleaning surface handles frequent sanitization in food service areas.
Exterior Facades
Enhances building exteriors with vibrant colors or woodgrain finishes that resist weathering. Suitable for low-rise commercial buildings, house exteriors, and outdoor kiosks, providing a maintenance-free alternative to painted wood or stucco.
Wet Area Walls
Perfect for bathroom shower walls, laundry rooms, and pool houses where moisture resistance is critical. The non-porous surface prevents mold growth, while the color-through construction means scratches from cleaning don’t reveal underlayers.
Q: What is the maximum wall height for a single panel run?
A: Panels can be installed vertically up to 3.6m height with proper stud spacing (40cm on center). For taller walls, horizontal installation with a mid-wall support rail is recommended to prevent deflection.
Q: How to clean exterior panels?
A: For exterior use, rinse with a garden hose (low pressure) quarterly to remove dust. For stubborn dirt, use a soft brush with mild detergent solution—avoid pressure washers (>1,500 PSI) which may damage the surface.
Q: Can it be painted over if color changes are needed?
A: Yes, lightly sand with 220-grit sandpaper to create a micro-rough surface, then apply acrylic latex paint. The non-porous surface requires a primer formulated for plastics to ensure adhesion, with touch-up paint lasting 3–5 years before recoating is needed.
Q: What is the fire performance rating for interior use?
A: It achieves EN 13501-1 Class B-s1,d0, meaning it has low flame spread, produces little smoke, and no burning droplets—suitable for use in corridors, lobbies, and multi-occupancy buildings where fire safety is critical.
