| Quantity: | |
|---|---|
The 6mm High Density PVC Foam Board for Cabinet is a lightweight yet robust material engineered specifically for precision cabinet components—addressing the need for thin-profile materials that don’t compromise on strength. With a density of 0.7–0.8g/cm³ (higher than standard PVC foam boards, which typically have a density of 0.5–0.6g/cm³) and a thickness of 6mm, it offers an exceptional strength-to-weight ratio: weighing only 4.8kg/m² (40% lighter than 6mm MDF, which weighs 8kg/m²) while supporting up to 5kg of static load per square meter. This makes it ideal for cabinet backs (preventing warping from wall moisture), drawer bottoms (supporting cookware or clothing), and thin-profile shelves (maximizing interior space). Manufactured using a closed-cell foaming process (with nitrogen gas to create uniform bubbles), this board is 100% waterproof (water absorption <0.3% after 24-hour immersion), resistant to mold (no fungal growth in ASTM D2017 testing), and free from formaldehyde or toxic emissions (meeting EU E1 standards for indoor air quality). It carries CE certification (EN 13950) (for plastic building materials) and Class B1 fire rating (GB 8624-2012) (a Chinese standard for low flammability, with flame spread <25 and smoke density <75)—ensuring safety in residential and commercial environments. Its uniform composition (no knots or voids) allows for clean cuts and seamless joints, critical for high-quality cabinet construction that requires precision fitting.
Precision Workability for Intricate Installations
At 6mm thickness, it cuts effortlessly with standard tools—including circular saws (equipped with fine-tooth blades for smooth edges), jigsaws (for curved cuts), and utility knives (for scoring and snapping thin strips). The cut edges are smooth (Ra <1μm) and require minimal sanding (only light sanding with 240-grit sandpaper), reducing processing time for cabinet makers. It accepts screws (size #4–#6), nails (15mm brads), and adhesives (PVC glue or wood glue) securely—even in edge applications (e.g., attaching to cabinet frames). This workability makes it easy to install in tight spaces (e.g., between wall studs or inside narrow drawers) and ensures precise alignment with other cabinet components (e.g., doors or shelves).
Structural Efficiency for Light-to-Medium Loads
Despite its thin profile, it boasts a flexural strength of 25MPa (measured according to ASTM D790) and a flexural modulus of 1,500MPa—supporting static loads up to 5kg/m² without bending or warping. This is sufficient for storing cookware (e.g., pots and pans in drawer bottoms), utensils (in cutlery drawers), or small appliances (e.g., toasters on thin shelves). In long-term load testing (30 days of continuous 5kg load), it shows no permanent deformation—ensuring durability for daily use. Its high density (0.8g/cm³) also prevents "oil-canning" (visible rippling) when installed as cabinet backs, maintaining a flat, professional appearance.
Space-Saving Design for Compact Environments
Its slim 6mm thickness maximizes interior cabinet space—a critical advantage in compact kitchens (e.g., studio apartments), bathroom vanities (small bathrooms), and built-in storage (e.g., hallway linen closets). For example, using 6mm board for cabinet backs instead of 12mm MDF adds an extra 6mm of interior space per cabinet—enough to store additional kitchen gadgets or toiletries. In walk-in closets, thin 6mm shelves can be installed more densely (e.g., 30cm apart) to maximize clothing storage, without adding excessive weight to the closet frame. Additionally, its lightweight nature reduces the overall weight of the cabinet—making it easier to mount on walls (requiring fewer wall anchors) and less stressful on cabinet frames.
Cabinet Back Panels
The primary application for 6mm high-density PVC foam board is as cabinet back panels—preventing wall moisture (from humidity or water leaks) from seeping into cabinet interiors and causing mold growth or damage to stored items. It is compatible with all cabinet styles, from modern flat-panel cabinets to traditional raised-panel cabinets, and can be cut to fit standard cabinet sizes (e.g., 60cm, 80cm, or 90cm width) or custom sizes. For cabinets mounted against exterior walls (prone to temperature fluctuations), it also provides minor thermal insulation—reducing condensation inside the cabinet. Unlike paper-backed MDF (which delaminates when wet), it remains intact even if the wall behind the cabinet becomes damp.
Drawer Bottoms & Thin Shelves
Ideal for lightweight drawer bases (in kitchen drawers, bathroom vanity drawers, or bedroom dresser drawers) and thin-profile shelves (in linen closets, pantry cabinets, or bookshelves). For kitchen drawers storing utensils or small cookware, the 6mm thickness provides sufficient support without adding bulk—allowing the drawer to open and close smoothly (even with full loads). In bathroom vanities, it resists moisture from toiletries (e.g., wet towels or bottles) and is easy to clean if products spill. For bookshelves, it can be used as thin shelves for paperbacks or small books—maximizing the number of shelves that can fit in a given space.
Q: Can it be used in outdoor cabinets?
A: Yes, its waterproof properties (water absorption <0.3%) and mold resistance make it suitable for outdoor kitchens (e.g., patio cabinets) or garden storage cabinets (for tools or gardening supplies). When used outdoors, it is recommended to seal all cut edges with PVC edge banding (to prevent moisture penetration) and install it in covered areas (e.g., under a patio roof) to protect it from direct rain. With proper installation, it has a lifespan of 10+ years in covered outdoor areas—outperforming MDF (which rots in 1–2 years outdoors) and plywood (which degrades in 3–5 years).
Q: How does it compare to MDF in terms of weight and durability?
A: It is 40% lighter than 6mm MDF (4.8kg/m² vs. MDF’s 8kg/m²)—reducing cabinet frame stress (preventing frame warping over time) and installation effort (fewer installers needed to mount wall cabinets). In terms of durability, it is far more moisture-resistant than MDF (which swells and delaminates when wet) and resistant to mold (MDF is prone to mold in humid environments). It also has a longer lifespan—15–20 years for PVC foam board vs. 5–8 years for MDF in indoor cabinets.
Q: Is it compatible with magnetic cabinet catches?
A: Yes, its dense core (0.7–0.8g/cm³) allows magnetic attachments (e.g., cabinet door catches or magnetic knife strips) to function reliably without additional reinforcement. The magnetic force is strong enough to keep cabinet doors closed securely—even in high-traffic areas (e.g., kitchen cabinets that are opened and closed frequently). For magnetic knife strips mounted on 6mm board, it can support up to 2kg of knives (distributed evenly) without bending.
Q: Can it be painted if I want to change the color later?
A: Yes, its smooth surface accepts water-based or oil-based paints with proper preparation. To paint, simply clean the board with mild soap and water, sand lightly with 240-grit sandpaper (to improve paint adhesion), and apply a primer (optional, but recommended for better color coverage). Most paints will adhere well to the surface—allowing you to refresh the cabinet’s appearance if you change your decor. Unlike MDF, it does not absorb paint excessively—requiring only 1–2 coats for full coverage.
Product Advantage
1. Fully Customizable PVC Foam Boards
Our PVC foam boards are available in thicknesses from 2 mm to 30 mm and densities of 0.4–1.00 g/cm³, ensuring the perfect balance between weight and rigidity. Whether you need ultra‑light signage panels or heavy‑duty construction sheets, we tailor each order to your exact specifications. Backed by a daily production capacity of 120 tons, we guarantee on‑time delivery and consistent quality for every project.pVC Foam Board features a lightweight PVC core, moisture‑resistant foam substrate, durable PVC foam core, high‑precision carving base, and anti‑mold panel construction. Ideal for carved cabinet door panels, exhibition displays, and retail signage applications, it ensures crisp CNC detailing, excellent print quality, and long‑lasting resistance in both indoor and outdoor environments.
