| Quantity: | |
|---|---|
The Flame-Retardant Cabinet PVC Foam Board for Bath sets new safety standards for high-moisture environments by combining superior fire resistance with bathroom-specific durability. Manufactured with a halogen-free flame-retardant formula, this closed-cell foam board achieves EN 13501-1 B-s1, d0 certification—the highest fire rating for decorative materials—with a flame spread index <15 and smoke density <450 (ASTM E84). Available in thicknesses from 5mm to 25mm and 12 moisture-resistant colors (including spa blue, cloud white, and stone gray), it addresses the dual challenges of bathroom safety: fire risk from electrical fixtures and mold growth from humidity. Its zero-formaldehyde emission (<0.005mg/m³) and IPX6 water resistance rating make it ideal for vanities, linen cabinets, and shower niches.
Fire-Safe Formulation for Bathroom Environments
Integral flame retardants suppress combustion at 3 levels: preventing ignition (LOI >32%), slowing flame spread, and reducing smoke release. Unlike fire-treated wood (which loses effectiveness when wet), its performance remains unchanged even after prolonged exposure to 95% humidity (ASTM D2247).
Mold-Proof & Water-Resistant Core
The closed-cell structure achieves water absorption <0.1% by weight (24-hour immersion), while an antimicrobial additive (silver ion technology) prevents mold and mildew growth per ASTM D3273 (0 colony formation after 28 days). Edge sealing is unnecessary for most applications, simplifying installation.
Structural Stability in Steamy Conditions
Withstands cyclic temperature changes from 10°C to 50°C (typical bathroom conditions) with dimensional change <0.05%, preventing door warping and hardware misalignment common with MDF or particleboard. The rigid core (density 0.75g/cm³) supports heavy countertop materials like stone and solid surface.
Bathroom Vanities
Perfect for vanity cabinets and drawer fronts, where proximity to hair dryers and electric shavers demands fire safety. The cloud white finish maintains brightness despite steam exposure, unlike painted wood which yellows over time.
Shower Enclosures
Used for niche shelving, bench tops, and accent panels within tiled showers. Its water resistance eliminates the need for waterproof membranes behind the material.
Linen Storage
Ideal for floor-to-ceiling linen cabinets in humid bathrooms, preventing mildew growth on stored towels and linens without chemical treatments.
Q: How close can it be installed to heat sources like towel warmers?
A: Safe for installation within 30cm of continuous 60°C heat sources. Maintain 50cm clearance from direct heating elements (>80°C).
Q: Does the flame retardant affect color stability?
A: No, advanced pigment encapsulation ensures color retention (ΔE <1.2) through 5,000 hours of UV exposure, matching non-flame-retardant versions.
Q: Can it be used for shower seats supporting human weight?
A: Yes, 20mm+ thicknesses support static loads up to 150kg when properly framed, exceeding ANSI Z124.1.1 requirements.
Q: How does it compare to FRP (fiberglass-reinforced plastic) in cost?
A: Initial cost is 20% higher than FRP, but 50% lower lifecycle costs due to no repainting needs and 15-year warranty vs. FRP’s 5-year lifespan.
The Flame-Retardant Cabinet PVC Foam Board for Bath sets new safety standards for high-moisture environments by combining superior fire resistance with bathroom-specific durability. Manufactured with a halogen-free flame-retardant formula, this closed-cell foam board achieves EN 13501-1 B-s1, d0 certification—the highest fire rating for decorative materials—with a flame spread index <15 and smoke density <450 (ASTM E84). Available in thicknesses from 5mm to 25mm and 12 moisture-resistant colors (including spa blue, cloud white, and stone gray), it addresses the dual challenges of bathroom safety: fire risk from electrical fixtures and mold growth from humidity. Its zero-formaldehyde emission (<0.005mg/m³) and IPX6 water resistance rating make it ideal for vanities, linen cabinets, and shower niches.
Fire-Safe Formulation for Bathroom Environments
Integral flame retardants suppress combustion at 3 levels: preventing ignition (LOI >32%), slowing flame spread, and reducing smoke release. Unlike fire-treated wood (which loses effectiveness when wet), its performance remains unchanged even after prolonged exposure to 95% humidity (ASTM D2247).
Mold-Proof & Water-Resistant Core
The closed-cell structure achieves water absorption <0.1% by weight (24-hour immersion), while an antimicrobial additive (silver ion technology) prevents mold and mildew growth per ASTM D3273 (0 colony formation after 28 days). Edge sealing is unnecessary for most applications, simplifying installation.
Structural Stability in Steamy Conditions
Withstands cyclic temperature changes from 10°C to 50°C (typical bathroom conditions) with dimensional change <0.05%, preventing door warping and hardware misalignment common with MDF or particleboard. The rigid core (density 0.75g/cm³) supports heavy countertop materials like stone and solid surface.
Bathroom Vanities
Perfect for vanity cabinets and drawer fronts, where proximity to hair dryers and electric shavers demands fire safety. The cloud white finish maintains brightness despite steam exposure, unlike painted wood which yellows over time.
Shower Enclosures
Used for niche shelving, bench tops, and accent panels within tiled showers. Its water resistance eliminates the need for waterproof membranes behind the material.
Linen Storage
Ideal for floor-to-ceiling linen cabinets in humid bathrooms, preventing mildew growth on stored towels and linens without chemical treatments.
Q: How close can it be installed to heat sources like towel warmers?
A: Safe for installation within 30cm of continuous 60°C heat sources. Maintain 50cm clearance from direct heating elements (>80°C).
Q: Does the flame retardant affect color stability?
A: No, advanced pigment encapsulation ensures color retention (ΔE <1.2) through 5,000 hours of UV exposure, matching non-flame-retardant versions.
Q: Can it be used for shower seats supporting human weight?
A: Yes, 20mm+ thicknesses support static loads up to 150kg when properly framed, exceeding ANSI Z124.1.1 requirements.
Q: How does it compare to FRP (fiberglass-reinforced plastic) in cost?
A: Initial cost is 20% higher than FRP, but 50% lower lifecycle costs due to no repainting needs and 15-year warranty vs. FRP’s 5-year lifespan.
